System includes the following major components/features:

Laser Wire Marker, Class 1 (for use on open shop floor)
o Integrated with 355 nm solid state UV YAG Laser
o Full graphics capability including upper and lower cases of alpha-numeric characters in any language, bar codes, logos, etc.
o Unlimited font/size selection and orientation (horizontal & vertical & multiline)
o Mark spacing from 2.5 mm ( .1 inch) to 2,500mm ( 99.9 inch)
o Three (3) different messages and variable mark spacing along wire length

Wire Processing
o Machine speed of wire output is up to 40 ft/min
o Wire sizes .75 mm to 10 mm, (26 AWG- 4 AWG)
o Single conductor wire or multi-core cable
o Min/Max cable length: 8.5 inches to 400,000 inches
o Any UV laser markable wires including, but not limited to
      - TKT/TK wires such as BMS 13-60, M22759/80-92,
      - ETFE, XL-ETFE such as BMS 13-48, M22759/32, etc.

Wire Handling
o Powered coil pan
o Belt type wire pulling mechanism for round wire and twisted cable
o Powered Cutter

Control
o System controlled by a laptop PC (included with the system)
      - Windows operating system (included with the system)
      - M100LFG-TT operating software (included with the system)
      - Excel, etc. compatible
o Integrated laser calibration software (included with the system)

Site Requirements
o Electrical Power 110/220 VAC, 50/60 Hz.
o Shop Air

Operating Conditions
o Ambient temperature 10 C to 40 C
o Relative humidity 20% to 90% (non-condensing)

Machine Size (footprint)
o Tabletop unit. Approximately 36" wide x 34 " deep x 27" high

Technical support
o Operation and Maintenance Manual (included with the system)
o One year warranty on a whole system (included with the system)
o Set of spare belts and cutting blades (included with the system)
o Remote installation / training (included with the system)